VEMS / Lugtronic Wire-in Stand-Alone ECU - ON SALE for $1,075!





$1,075

Overview:

This is the VEMS Stand Alone ECU, onboard 4 Bar MAP Sensor, with an Un-Terminated Wire Harness included.
Full Support, Instructions, Basemap, and Manual is included as well.
This ECU has features that equal and exceed other brands models, despite costing much less.
For the easiest and quickest installation, see the Applications below.

VW / Audi Applications:

General Applications:

  • Any VW / Audi, or any other car brand (Contact us for custom applications)
  • The Wire-in ECU includes an unterminated wire harness and instructions

Basic Specs:

  • 8 High Impedance Injector Drivers
  • 8 High and Low Power Ignition Drivers
  • Onboard Wideband O2 Controller
  • Onboard or External MAP Sensor - 400 KPA (44 PSI Boost)
  • 1-2 EGT Inputs for K-Type Thermocouple
  • Optional Dual Knock Sensor Inputs
  • 16x14 maps for Fuel VE, Ignition Timing, and Lambda Target
  • Idle Air Control
  • Boost Control vs. Speed, Gear, RPM and TPS
  • Launch Control and Anti-lag
  • Full Throttle Shift Cut
  • 6-8 Analog Inputs (Voltage, Fuel, Oil, Exhaust Pressure, Extra EGT, etc.)
  • 2 Wheel Speed Inputs
  • Extra Outputs available for: Tachometer, Fan, Fuel Pump, Shift Light, Water Injection, Nitrous, etc.

Inputs:

  • Crankshaft Speed/Position
  • Camshaft Speed/Position
  • Throttle Position
  • Air Temperature
  • Coolant Temperature
  • 1-2 EGT Exhaust Temperature
  • Wideband O2 Sensor
  • 2 Knock Sensor (optional)
  • 6-8 Analog Inputs (0-5 volts)
  • 2 Wheel Speed Inputs

Outputs - Hardware:

  • 8x Injector Outputs
  • 8x Ignition Outputs
  • 6x 350mA Misc. Outputs
  • 4x Stepper Motor Outputs

Outputs - Software:

  • 2x RPM/TPS/MAP/Speed/Misc Outputs
  • 1x RPM Output
  • 1x WOT/RPM Output
  • 1x Tachometer Output
  • 1x Idle Valve Output (2 or 3 wire ISV)
  • 2x Boost Valve Output
  • 1x Anti-Lag Throttle Kicker Output
  • 1x Fuel Pump Relay Output
  • 1x Fan Relay Output
  • 1x Water Pump Relay Output
  • 1x Warning Light Output
  • 1x Auto Trans Brake "Creep" Output

Construction:

  • High quality extruded aluminum, powder coated case
  • OEM automotive grade harness connector
  • Aluminum endplates with water resistant gaskets
  • Surface mount internal components